Fitted Tube Sets

 Gauge Fitted Sets for 12 Ga. Guns (Includes 20 ga., 28 ga. & 410 bore.

Ultimate Ultralite Conversion

Match weight, match balance, straight rifled tubes, long forcing cones (additional cost) 4 screw-in chokes per gauge, red colour anodized tubes for top, blue colour anodized tubes for bottom.

Ultralite Conversion

Match Weight, 4 screw in chokes per gauge, red colour anodized tubes for top, blue colour anodized tubes for bottom.

Match Weight Conversion

Match weight, titanium .410 bore chambers, 4 screw-in chokes per gauge, grey anodized.

Trigger Conversion for Interia Triggers

Makes your second barrel ready to fire with a minimum amount of recoil, suitable for firing .410 bore shells: required for all intertia triggers.

Long Forcing Cones

In tube set at time of manufacture (12 ga. must have LFC)

Special Tube Set Colours Available

Call Brian for colour availability.

2 Gauge Tubeset For 20 Ga. Gun (fitted) Includes 28 ga. & 410 bore.

Ultralite Conversion

28 ga., Titanium .410 bore chamber, 4 screw-in chokes per gauge*, red/blue anodized.

Standard Conversion

28 ga., Titanium .410 bore chamber, 4 screw-in chokes per gauge*, grey anodized.

Single Gauge Tubeset (fitted) - 4 Screw in chokes Per Pair

Tube Size         Gauge of Gun       

20 ga. tubes          In 10 ga. gun

20 ga. tubes          In 12 ga. gun

28 ga. tubes          In 12 ga. gun

28 ga. tubes          In 16 ga. gun

28 ga. tubes          In 20 ga. gun

.410 bore tubes    In 12 ga. gun

.410 bore tubes    In 16 ga. gun

.410 bore tubes    In 20 ga. gun

Carrier Barrel (cutomser provides barrel)

The maximum amount of inside barrel material is removed in an effort to make this barrel weigh the same as it did before a sub gauge tube set is installed. This makes the barrel unable to fire 12 ga. shells.

*20 gauge barrels must have a minimum bore diameter of .625" for the 28 gauge tibe set to have screw in chokes. If less than .625" the 28 gauge tube set will have fixed chokes of your choice.